518-452-5995




Shop on Line

Product Line

Equipment Deals

Service and Repair

About Us

Contact Us

 
Regional

Distributor
 
search site:

go
©2010, Chris' Coffee Service, All Rights Reserved.


Chris' Coffee videos


Home-Barista.com: Your guide to exceptional espresso

Click for WebMotif Net Services
Quality and Service, Second to None View CartCheckout
Office CoffeeFood ServiceCoffee HousesHome Products
New Items Espresso Machines Grinders Coffee Brewers Cafelat Products Bumper Products Accessories Tampers & Tamping Stands  
Pitchers & Knock Box Steam Arms & Tips Espresso Coffee Harney & Sons Gourme Espresso Cups Illy Cups Group Parts Electronic Parts  
Grinder Parts Misc. Parts John Guest Fittings Isomac Parts Plumbing & Filters  
Home >> Product Line >> Home Products >> Isomac Parts 

Isomac Replacement/Repair PartsIsomac Replacement/Repair Parts

In this section you can find several of the most commonly sought after replacement parts for Isomac Espresso Machines. Many of the these parts will also work in other machines as well, such as Andreja Premium, Pasquini, Giotto, Oscar, Valentina, etc. etc. In some cases the parts in this section are of higher quality than original and will not only work fine but more reliably than original.

For Our Customers outside the Continental US; including Alaska, Hawaii, Canada and Mexico::
• We now ship most parts & accessories via US Postal Service (USPS) – keep in mind that all of our electronic parts are 110 Volt 60 Hz
• All of our machines are 110 Volt 60 Hz and therefore will NOT operate in most European countries that require 230 Volt 50 Hz
• We also cannot ship any porcelain cups due to the breakage factor
• Should you wish a quote we will need the following:  a list of the desired items in order to determine the ship weight and the ship-to address
• We will calculate the shipping costs and reply with quote via email
• Please email your request to Tynnetta@chriscoffee.com
Ulka Vibratory Pumps EAX5 52 WattUlka Vibratory Pumps EAX5 52 Watt
Ulka Vibratory Replacement Pump EAX5 52 Watt. Ulka is the most trusted name in vibratory pumps in the industry. The EAX5 52 Watt has brass ends, not plastic. Brass makes a much more secure connections than models with plastic ends. Pumps with plastic fittings tend to develop leaks over time. This pump will also replace the 41 Watt models found in Silvia's as well as other espresso machines. [more]

Pressure StatPressure Stat
Pressure Stat for Quick Mill, Isomac, Pasquini, Giotto, and several other machines.

If you are ordering this for a Quick Mill machine, such as Andreja Premium, Anita, or Vetrano please indicate that in the comment section. You will need and adaptor and we will include it at no charge. [more]

$36.95 - Item #MG120UL QTY  
Coffee Stat, Steam Stat and Hi LimitCoffee Stat, Steam Stat and Hi Limit
There are three items to choose here. All three of them are for Rancilio Silvia. The Steam and Coffee stat also work on many other single boiler machines like Isomac Zaffiro, Isomac Amica, and several others. The coffee stat is rated at 100 degrees C and the steam stat is rated at 140 degrees C.  The images can be blown up very large to enable a close up look so you can compare yours to these. [more]

From $12.95 to $14.95 QTY   
Thermal FuseThermal Fuse
This is a replacement Thermal Fuse for an Isomac Espresso Machines. These are better than original simply because they are the correct temperature rating 167 degree C. The Isomac machines come with too high a rated fuse 184 degree C and as a result the heating element will blow in many cases before the fuse that is meant to protect it. [more]

$9.95 - Item #G4A01167C QTY  
Jaeger Pressure StatJaeger Pressure Stat
Jaeger pressure stats are one of the most reliable pressure switches on the market today. If you are looking for a better quality pressure stat than C.E.M.E. or MA-TER, look no further. Sirai commercial stats are actually considered the best quality. But unfortunately, in most cases Sirai stats will not fit in machines like Isomac, Giotto, Expobar, Quick Mill, or several other semicommercial machines. Sirai stats are simply too large in size. But the Jaeger stat is only slightly larger than the C.E.M.E. and MA-TER stats, and therefore fits with no problem.

When ordering this pressure stat please let us know, in the comment section, what make machine you are installing it on. You may need an adapter, we will be happy to include the necessary one free of charge if you simply indicate the machine make. [more]

$62.95 - Item #ESS8700 QTY  
Water Solenoid ValveWater Solenoid Valve
This inllet water solenoid valve is a replacement for many semi commercial espresso machines. The list includes but is not limited to Isomac, Quick Mill, Giotto, Euro 2000, and many others. [more]

$47.95 - Item #V192 QTY  
Boiler Pressure Relief ValveBoiler Pressure Relief Valve
This boiler pressure relief valve is a replacement for many semi commercial espresso machines. The list includes but is not limited to Isomac, Quick Mill, Giotto, Euro 2000, and many others. [more]

$48.50 - Item #OT0980VS QTY  
Liquid Level ProbeLiquid Level Probe
This liquid level probe will fit almost every espresso machine made. It is deliberately longer than most liquid level probes in order that you can trim it to the appropriate for your need. For Quick Mill machines please call service. [more]

$12.95 - Item #V072 QTY  
Power Relay 110 volt 25 ampPower Relay 110 volt 25 amp
Replacement power relay for espresso machines such as Isomac Tea, Mllenium, Relax, Rituale. Also used on our own Andreja Premium. [more]

$51.95 - Item #84137011 QTY  
Giemme Control Board for Isomac Espresso MachinesGiemme Control Board for Isomac Espresso Machines
This is an original replacement board for the following 110 volt espresso machines, Isomac Tea, Mllenium, Relax, and Rituale. [more]

$169.00 - Item #IGCB321 QTY  
Thermostat for Zaffiro, Amica, or Quick Mill AlexiaThermostat for Zaffiro, Amica, or Quick Mill Alexia
This thermostat by Prodigy we have found to be more reliable than the original one that comes with the Isomac Zaffiro and Amica by CAEM. [more]

$39.00 - Item #IZT321 QTY  
Replacement Expansion ValveReplacement Expansion Valve
Replacement Expansion Valve for Isomac Zaffiro, Amica, Relax, Millenium, and Tea. This expansion valve is the same one we use on our Andreja Premium. It is easy to make adjustments to and not overly sensitive.

Currently out of Stock [more]

$32.95 - Item #EV321 QTY  
Isomac Heating ElementIsomac Heating Element
Heating element for Isomac Relax, Millenium, Ritual, Amica, Zaffiro, and Tea. It is recommended that you change the gasket at the same time you change the element, gasket sold separate.

Note: This element also fits the Quick Mill Alexia. [more]

$49.00 - Item #IHE970 QTY  
Isomac Heater GasketIsomac Heater Gasket
This is a heater gasket for the Isomac Zaffiro, Amica, Relax, Tea, And Millenium. We have found this gasket to be much more reliable than the red rubber ones that come with Isomac machines. [more]

$4.95 - Item #83501 QTY  
Red and Green Power LightsRed and Green Power Lights
These lights are the same for several machines, such as Millenium, Tea, Anita, Vetrano, Alexia, Andreja Premium, etc. [more]

From $7.95 to $9.95 QTY   
Steam & Hot Water ValveSteam & Hot Water Valve
Steam and hot water valve for Isomac Relax, Millenium, Ritual, Amica, Zaffiro, and Tea. This also fits first generation Quick Mill Anita and Alexia. If your stean arm only moves side to side this valve is the correct replacement. [more]

$39.95 - Item #OT0980RU QTY  
Boiler and Group Pressure GaugesBoiler and Group Pressure Gauges
Here you can find both Boiler and Group pressure gauges. We also include with each gauge a new capillary tube. These gauges are the same as you find on such machines as Quick Mill, Isomac, Euro 2000, and several others.

Includes Guage and Capillary Tube. [more]

$49.00 - Item #BPGQML QTY   
This product includes the following bonus items: Capillary Tube.
Micro SwitchMicro Switch
This Micro Switch is used in two places on the Isomac, one under the water tank which cuts power to the heating circute when the water gets too low, and one behind the lever on the E61 group to activate the pump. [more]

$13.95 - Item #INO970MI QTY  
New Vacuum Breaker ValveNew Vacuum Breaker Valve
If you are having trouble with vapor lock on your espresso machine try this vacuum breaker valve, it should solve your problem. What is vapor lock? Vapor lock is when you put your espresso machine on a timer so it will be ready when you get up only to find that as soon as you open the steam valve your pressure drops to zero in a matter of a couple of seconds, and your group is not hot. Your machine heats up as normal after that, which if you wait for you will be late for work. [more]

$12.75 - Item #F814 QTY  
Stainless T ConnectorStainless T Connector
This is what we use to replace the Y Connector that keeps cracking and leaking on an Isomac Espresso machine from lying against the boiler. You never have to worry about it melting or drying out and cracking again. [more]

$4.95 - Item #HBT4 QTY  
Silicone Tubing 1/4" by 12"Silicone Tubing 1/4" by 12"
This is replacement silicone tubing for your water lines inside Isomac Espresso Machine or for that matter many semi commercial espresso machines. Silicone tubing has a tendency to dry out and become brittle over time especially when subjected to heat for prolonged periods of time. It's a good idea to check the condition of your tubing every now and then and replace it as needed before leaks occur. [more]

$3.95 - Item #S14TUBING QTY  
Inlet Tube ScreenInlet Tube Screen
This is simply the protective screen that goes on the end of your intake tube on your pump. It purpose it to prevent any sediment or dirt from being sucked up into you pump and causing possible problems. [more]

$3.95 - Item #PL0950FI QTY  
Cat-ion Water SoftenerCat-ion Water Softener
This Cat-ion water softener is 2 1/2 times larger than the ones that come with some semi commercial espresso machines. There is approximately 50 grams of resin inside, which makes it capable of removing approximately 65 grains of hardness. Does a great job of removing calcium and magnesium. [more]

$17.95 - Item #MG180 QTY  
"New" Isomac 2 Hole Steam Tip"New" Isomac 2 Hole Steam Tip
"New" Two hole steam tip with smaller holes making it easy to microfoam small quantities of milk before over heating the milk. This tip fits the following machines but is not necessaraly limited to, Isomac, Euro 2000, Pasquini, Giotto, Quick Mill Alexia, Quick Mill Anita, Izzo Alex, Expobar, and Grimac. The thread is female and 10 mm in size. [more]

$9.95 - Item #NEW2HSTIP QTY  
Standard Isomac 2 Hole Steam TipStandard Isomac 2 Hole Steam Tip
Standard 2 hole steam tip fits the following machines but is not necessaraly limited to, Isomac, Euro 2000, Giotto, Quick Mill Alexia, Quick Mill Anita, Izzo Alex, Expobar, Pasquini, and Grimac. The thread is female and 10 mm. [more]

$7.50 - Item #2HSTIP QTY  
Pasquini 4 Hole Steam TipPasquini 4 Hole Steam Tip
Since we have received numerous requests for 4 hole-steaming tips that fit machines with 10 mm male steam arms we decided to now offer this Pasquini 4 hole tip to meet those requests. This tip fits the following machines but is not necessarily limited to, Isomac, Euro 2000, Pasquini, Giotto, Quick Mill Alexia, Quick Mill Anita, Izzo Alex, Izzo Duetto, Expobar Pulsar, Expobar Office Control, Expobar Office Lever, and Grimac. The thread is female and 10 mm in size. [more]

$13.95 - Item #90519 QTY  
Back Flush Disk Stainless or RubberBack Flush Disk Stainless or Rubber
The stainless 58 mm back flush disk fit all portafilters used in conjunction with E61 groups. For example: Quick Mill, Isomac, Euro 2000, Grimac, Giotto, Rancilio, and Faema. It also fits many other 58 mm portafilters. The rubber disk fits all the above plus many others. The diameter of the disk is 50 mm. The 50 mm rubber disks is what we send with each La Spaziale machine we sell. This disk drops into the double portafilter insert baskets and works well. For those that prefer stainless we also offer a stainless 53 mm blank as well. We personally find the rubber disk much easier to use, drop it in, run the back flush take it out and rinse. [more]

From $4.95 to $7.95 QTY   
Insert BasketsInsert Baskets
Insert baskets for several different espresso machines, including but limited to, Pasquini, La Spaziale, Cimbali, Rancilio, La Marzocco, and all machines with E61 groups such as Isomac, Giotto, Expobar, Valentina, Andreja Premium, Anita, and several others. [more]

$7.50 - Item #F272 QTY   
Single Portafilter SpoutSingle Portafilter Spout
This spout fits most all commercial portafilters. This come in handy if you only brew doubles and want the coffee to exit through a single spout. [more]

$7.50 - Item #F233 QTY  
Group GasketGroup Gasket
At Chris' Coffee Service we stock group gaskets for several different machines. Included but not limited to are Pasquini, Quick Mill, La Spaziale, Rancilio Silvia, Nuova Simonelli Oscar, and E61 in various thickness, etc. [more]

From $6.50 to $9.95 QTY   
Group Shower ScreenGroup Shower Screen
Group Shower Screen for machines with E61 Groups such as Isomac, Valentina, Giotto, Andreja Premium, etc. We also have the shower screen for the Isomac Relax, Cimbali, La Spaziale and more. [more]

From $7.50 to $11.95 QTY   
Replacement Portafilter HandleReplacement Portafilter Handle
Replacment Portafilter Handle for most commercial portafilters. [more]

$9.95 - Item #F926 QTY  
Star Shaped Steam KnobsStar Shaped Steam Knobs
Replacement star shaped steam and hot water knobs for Isomac, Giotto, and Euro 2000 espresso machines. [more]

$9.95 - Item #ISSK99 QTY  
Isomac Water Reservoir TankIsomac Water Reservoir Tank
Replacement Water Reservoir Tank for Isomac Tea, Millenium, Relax, and Zaffiro. [more]

$29.50 - Item #TANK QTY  
Portafilter with gauge for E61 groupPortafilter with gauge for E61 group
If you have a semi commercial espresso machine, with an E61 group which doesn't have a pump pressure gauge, you should not be without this portafilter with gauge. This is the tool you need to check your pumps output pressure and make adjustments to your expansion valve when necessary. [more]

$59.95 - Item #F920 QTY  
Mechanical Float ValveMechanical Float Valve
This mechanical float valve comes with 1/4" John Guest elbow fitting pre-istalled for easy installation. [more]

$14.95 - Item #MA252 QTY  
This product includes the following bonus items: John Guest Elbow.
Direct Connect SystemDirect Connect System
If you are tired of filling the reservoir in you Isomac Tea, Millenium, or Relax, then this is just what the doctor ordered. This direct connect system has everything you need to connect from your water source to the machine, and comes with our easy to follow installation instructions. This system eliminates the use of a water reservoir tank. The best part is no trips to Home Depot, everything you need is here.

Add a Water Filter or Water Softener System with this direct connect system and you not only made your life easier but you will insure a longer more trouble free life for your new espresso machine. [more]

$99.00 - Item #DIRECTCNT QTY  
Float SystemFloat System
If you are tired of filling the reservoir in you Isomac Tea then this is just what the doctor ordered. This float system has everything you need to connect from your water source to the machine, and is easy to install. The float system keeps your water resevour tank full at all times. The best part is no trips to Home Depot, everything you need is here.

Add a Water Filter or Water Softener System with this direct connect system and you not only made your life easier but you will insure a longer more trouble free life for your new espresso machine. [more]

$69.00 - Item #FLOATSYS QTY  
Food Grade LubricantFood Grade Lubricant
Lubri Film Plus is a food grade lubricant used in the food service industry. Some of the more common applications are soft ice cream machines, granite machines, and non-carbonated beverage dispensers. We use it to lubricate squeaky E61 levers mechanisms. [more]

$7.95 - Item #LFP QTY  
E61 Cam Lever GasketE61 Cam Lever Gasket
If your E61 group is leaking where the lever is attached to the group this is probably the culprit.

When ordering keep in mind there are two of these in the assembly we recommend you change both not just one.

While you have the assembly apart you should lubricate the parts before reassembling. Only use a food grade lubricant, Like This [more]

$1.75 - Item #W547 QTY  
Air Release ValveAir Release Valve
This valve is located directly after your vibe pump. The symptoms of this valve malfunctioning is excessive amount of water going back into the water tank while pulling a shot. [more]

$12.95 - Item #3530023 QTY  
Product Line | Internet Policy | FAQ | About Us | Shopping Cart | Contact Us | UPS Tracking
©2010, Chris' Coffee Service, All Rights Reserved. 518-452-5995