.
Pressure Regulator Valves with Gauge

Pressure Regulator Valves with Gauge

Size:  
$89.95

In stock

Plumbing

Parts Supplier

334G

Share:

This pressure regulator valve with gauge comes complete with either a 1/4" or 3/8" John Guest fittings pre-installed for easy installation. The valve is preset to 50psi. While it has a range of 0-100psi, we recommend that the regulator be set to 35-45psi when used for an espresso machine.

In order to install and set your pressure regulator, please follow these steps:

  1. Turn off your water supply
  2. Install the pressure regulator on your line post-filter but before the machine. A numbered "1" and "2" on the regulator body indicates the input and output respectively. It may also have an arrow indicating the correct direction. It is very important that you install it in the correct direction! Installing it backwards will mean that you cannot adjust the regulator
  3. Put the output tube of the pressure regulator into a bucket
  4. Turn the water supply on so that the water runs through the regulator and into the bucket
  5. After attaching the water supply, outlet pressure can be increased by rotating the adjustment screw clockwise. Pressure can be decreased by turning counter clockwise. Push knob inward to lock pressure.
  6. Push back down on the adjustment knob to set that pressure
  7. Turn off the water supply
  8. Connect the output tube of the regulator to your machine
We fulfill orders Monday through Friday from our warehouse in Latham, NY. Orders may take anywhere from 1-3 business days to be fully processed and shipped out. We use USPS or UPS as our preferred carriers. Orders over $50 are eligible for FREE shipping within the contiguous U.S., and we reserve the right to select which carrier to use based on cost and speed in which the package will arrive to the final destination. Orders over $250 will require a signature for delivery. If however, you would like to waive this additional insurance, please fill out the form here and by doing so you agree to the terms and conditions contained within. Please save all packaging for any future reasons for shipping including returns, exchanges, and repairs. All exchanges & returns must be recieved within 30 days of the ship date. A return can be initiated by contacting a Chris' Coffee customer service representative here.

Commercial equipment & coffee are NOT eligible for returns or exchanges.

Read Full Shipping Policies & Full Refund Policy Here.

Please Note: Chris' Coffee will not be responsible for any delivery delays due to unforeseen circumstances outside our reasonable control such as delays due to severe weather, natural disasters, strikes, etc.

For any questions or concerns please email support@chriscoffee.com