Quick Links

Our Blog


  Home > Accessories >

  Joystick Assemblies
Joystick Assemblies

Alternative Views:

Multi-directional joystick steam and hot water assemblies for the Andreja Premium and the Vetrano espresso machines by Quick Mill. The assemblies are only able to easily fit on these two espresso machines, no adapter required. They will fit not only the new designed models but the original models as well. The joystick steam arm assembly comes with a standard two hole tip.

**NOTE**: These joystick assemblies can also be fitted on to the Alex II, Alex Duetto (II and 3.0), Isomac machines, Quick Mill Vetrano 2B, and Exbobar machines. However, an adapter is needed for each joystick assembly in order to operate. It is listed below. These will NOT work on the Rocket machines.

Hot Water Joystick measures 7" in length
Steam Joystick measures 8.5" in length
Thread size 1/4"in British thread.

Item# Item Name Chris' Price Qty Add
OT0995RUA Joystick Assemblies - Hot Water Arm
OT0995RUV Joystick Assemblies - Steam Arm
Check the items you wish to purchase, then click

Accessories (Related Products)
Joystick Assembly Adapter for Izzo Machines
Chris' Price: $13.95

Group Gaskets - Aurelia by Nuova Simonelli

Average Rating: 4.5 of 5 Total Reviews: 6 Write a review »

  0 of 0 people found the following review helpful:
Great upgrade on Expobar Brewtus August 28, 2016
Reviewer: Herman from NC United States  
I got both of these joystick assemblies and two of the izzo adaptors and it worked great on a brewtus II. Took less than an hour, start to finish, and they look and work great!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Joystick August 28, 2016
Reviewer: Bruce Wiebe from Winnipeg, MB Canada  
Mackenzie was very helpful. I'll be back

Was this review helpful to you?

  0 of 0 people found the following review helpful:
great service May 9, 2016
Reviewer: Daniel Rutherford from Huachuca City, AZ United States  
Never fails, every time I use Chris' coffee the service is outstanding. Any questions about installation are always answered right away. Joystick assembly fits perfect and works like a charm.

Was this review helpful to you?

  2 of 2 people found the following review helpful:
Fits rocket machine November 24, 2014
Reviewer: Anonymous Person from hammonds plains, NS Canada  
On a whim I tried this on my rocket cellini classic. Works perfectly. You do need the 10$ adapter. I plan to make a joystick on the hot water arm too!

Was this review helpful to you?

  1 of 1 people found the following review helpful:
works but jury out January 6, 2014
Reviewer: Tim from Vienna , VA United States  
No installations instructions.  Alex Tre by Izzo, required really cranking on the adapter to get the joystick assembly snug since the copper flare gasket takes up space.  thin copper nut on original assembly remains off since the retaining nut will not fit with the retaining nut from the pump line. Joystick wand housing points out since the assembly base at the case has to be straight to fit the PID housing, which barely fits, and requires some assembly manipulation to make it fit.  The wand is much longer, and requires extra maneuvering to get over the tray.  The joystick handle was loose, so I took pliers to hold the metal part and hand tightened the handle (hope it stays on).  Once installed, the joystick works well.

Was this review helpful to you?

View All Customer Reviews