Home > Parts > Group Parts >

Digital Thermometer & Adapter for Exposed E61 Groupheads

Digital Thermometer & Adapter for Exposed E61 Groupheads


 
Alternative Views:


Chris' Price: $109.50


Product Code: SSS-04
Qty:

Description
 

The purpose of this adapter and digital thermometer is to facilitate the measurement of brew water temperature about 1.25" away from the puck during a real brew cycle. In addition, and equally important, it measures the temperature of the group-head under idle conditions. It requires no drilling, tapping, soldering, brazing, cutting, Teflon tape, or epoxy but can ONLY be installed in E61 group-heads that are fully exposed. The difference between the temperature that you will be measuring using this adapter and measured temperature of the water hitting the puck is approximately 3-5 °F but may vary with different machines and different brew conditions and most certainly, varies over the course of a typical 23-27 second shot. The new style thermometer has switches for both the on/off function and temperature scales (°F/°C).

Note: If you are not positive that your machine has an E61 Group take a digital photo and send it to us for verification.
Send to: intsales@chriscoffee.com

For any questions or concerns contact:

Eric Svendson
Phone: 301-587-5033
Email: erics@erols.com

Features


  • Stainless steel adapter fitted with replaceable nylon ferrules and a modified digital themometer with rapid response °F or °C (user selectable)
  • Two 6 mm copper sealing washers (one for installation, one as a spare)
  • Adapter closure plug (should you want to temporarily suspend the temperature measuring adventure)
  • One set of spare nylon ferrules (front and back) for adapter

Average Rating: 5 of 5 Total Reviews: 35 Write a review »

  0 of 0 people found the following review helpful:
 
Needed info for tuning E61 shots July 15, 2019
Reviewer: Bill Rogers from El Sobrante, CA United States  
Eric's thermometer is straight forward to install and really takes the guesswork out of temperature control on the E61. First one was defective but Eric called me back and sent  a replacement.  Nicely engineered.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
May 30, 2019
Reviewer: Anonymous Person from Brooklyn, NY United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Essential equipment May 10, 2019
Reviewer: stephen shelby from Evanston, IL United States  
Eric's thermometer should be on every e-61 group. Gives essential info for any machine.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
If you really want to know May 4, 2019
Reviewer: Charlie VanHouten from Boulder, CO United States  
If you really want to know what temperature your machine is brewing at, this in-head thermometer will show you. It also shows why double boiler machines are recommended.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Just what I needed. January 26, 2019
Reviewer: Anonymous Person from Sarasota, FL United States  
Takes the stress out of calibrating the machine’s temperature.

Was this review helpful to you?

View All Customer Reviews