Andreja Premium by Quick Mill

In Stock Ready to Ship

We started with a model Quickmill already manufactured called the Andreja. Although the Andreja as it existed was, in my opinion, a better-built machine than the Isomac machines, it still wasn't what I wanted or what my customers were asking for. Take a look at the list below of the changes and additions I had Quickmill do to make the Andreja Premium machines that is now not only beautiful but also very functional and extremely reliable.

Machine is constructed out of high grade #304 food grade stainless steel.
(Several of our competitors advertise that their machines are stainless steel construction, there is a difference however between ours and theirs. All of our Quick Mill machines use only #304 food grade stainless, even the frame is constructed of the same high grade stainless. Some of our competitors machines use low grade #240 stainless steel that a magnet will stick to. This low grade stainless is not food grade and will not hold its luster like #304 and can rust over time. Last but not least many of the machines that advertise stainless steel construction, only the outer shell is made of stainless and the frame, which is the most likely if any to develop rust.)
Changed the vacuum breaker valve to the best quality one I could find.
(No vapor lock problems with this valve if you want to put your machine on a timer.)
Upgraded to a 52 Watt Ulka pump with brass ends and built-in thermal overload protection.
(Higher wattage pumps do not have to work as hard and produce less noise, brass ends won't loosen up and develop leaks like less expensive 41 watt Ulka pumps with plastic ends used in a Silvia, and thermal couple mounted on the side of the pump coil protects pump by shutting pump off if it runs too long and gets too hot end result no damage to the pump.)
Precise magnetic sensor switch controls water tank level.
(Huge improvement over out dated design that uses micro switch and spring loaded shelf. Spring loaded shelf creates a lot of vibration noise inside the machine, in addition the four posts welded to the frame of the machine will develop rust where they are spot welded. Unlike micro switches controlled by the weight of the water in the tank, a magnetic float is exremley accurate and shuts the power to the heater with the same precise amount of water inside the tank each and every time from the day you take the machine out of the box.)
Added a pump pressure gauge to the already-existing boiler pressure gauge.
(People would tell me they liked the looks of the Millenium but they wanted a pump pressure gauge so they could adjust their pump's output pressure and see the resistance exerted by their coffee.)
Resettable hi-limit to protect the heating element.
(No fusible link that has to be replaced -- just push down and it's reset.)
Premium-quality commercial-grade steam and hot water valves.
(The valves do not seat by compression and therefore don't wear out. They can also be easily repaired by replacing a couple of O-rings if needed.)
No-burn, swiveling stainless steel steam arm.
(Same as the Giotto Premium - simply put they are the best!)
Insulated the boiler.
(Keeps your kitchen cooler, no more problem with tubing lying against hot boiler and springing a leak, more energy efficient heater cycles less frequently, and most importantly keeps expensive electrical components cooler preventing failure from over heating.)
Large-capacity drip tray with new drip tray cover.
(Easy to empty, pulls out like your silverware drawer and no more water on your counter with the newly designed drip tray cover.)
Added a 20 mm diameter access port to pressure stat for easy adjustment.
(Not necessary to remove the machine cover to adjust stat.)
Had Quick Mill add an access panel directly under the heating element.
(With a vertical boiler it is very difficult to remove a heating element. Without an access hole large enough to remove the element, you would have to break all the connections and remove the entire boiler first.)
The list above is basically the differences between the Andreja and the Andreja Premium

Other features included on both machines
Available direct-connect includes everything you need.
(Well thought-out for easy install includes regulator and pressure gauge.)
Best quality expansion valve on the market today.
(Very easy to make precise adjustments; Isomacs are very sensitive to minor adjustments.)
Much easier to remove outer shell for service than many other machines.
(This was especially a problem for us with the Isomac Millenium.)
Power indicator stays on and heater lights go off when water is needed.
(Giotto gives no indication and Isomac turns the machine off completely.)

You also get peace of mind to know that all warranty work is handled by Chris' Coffee Service, Inc. Our staff of factory-trained technicians has over 100 years combined experience servicing all makes and models of commercial espresso machines. They are not only here to service machines but are available to take your phone calls to answer any questions you may have.

Want to see what Andreja Premium owners have to say about this machine, and more importantly our service before, during, and after the sale? Click Here To read for yourself what real buyers like yourself have to say about the Andreja Premium.

Features

• High-quality stainless steel construction #304 food grade, even the frame itself.
  (Many machines on the market use low grade #240 stainless that a magnet will stick to. In addition many machines also fail to tell you that ONLY the outer shell is made of stainless and not the frame, where rust is most likely to develop.
  
• E-61 commercial group
  
• Two complete 58 mm portafilters (one single and one double)
  
• Built-in heat exchanger
  (brew coffee and steam milk simultaneously)
  
• Thermo siphon circulation
  (maintains consistent brewing temperature)
  
• Ulka 52 watt vibratory pump with thermal overload protection
  
• Lever-action Semiautomatic
  
• Boiler: 1.6 liter capacity
  
• Insulated boiler keeps your kitchen, and more importantly, expensive internal electrical components cooler preventing failure due to exposure to excessive heat.  
  
• Water reservoir: 3 liter capacity
  
• Large, pull-out stainless drip tray with 46 ounce capacity
  
• Weight 46 lbs.
  
• Cup warmer
  
• Hot water and no-burn steam nozzles
  
• Boiler pressure gauge
  
• Group pressure gauge
  
• Precise, magnetic switch detects low water level
  
• Automatic water level control  
  
• 1,400 watt heating element
  
• Blank for backflushing
  
• Direct connect option available Click Here
  
  

Do you want to learn more?  Read Home-Barista.com's Buyer's Guide featuring the Andreja Premium. This time around, the guide focuses on one of the most popular espresso machine designs, the E61. As part of an E61 roundup, it compares the Andreja Premium with two other competitive offerings. Espresso enthusiasts should also check out the hints and tips in the article entitled, "How I Stopped Worrying and Learned to Love HXs"

Warranty: One-year parts and labor provided by Chris' Coffee Service, Inc.

(Free shipping in the 48 continental United States)

For sales in Canada with free shipping and no PST tax Click Here
 
For sales in United Kingdom and Southern Ireland Click Here