Info

Specials

Quick Links



Our Blog

InstragramInstragram

  Home > Accessories >

  4 Hole 0.9 mm Steam Tip for No Burn Arm
4 Hole Steam Tip | 4 Hole 0.9 mm Steam Tip for No Burn Arm


 
Chris' Price: $15.95


Product Code: QM4HNB
Qty:

Description
 

The No Burn Steam Arm has become more and more popular, now standard on several high end home espresso machines. The arm comes standard with a 4 hole steam tip that has two rather large holes and is difficult to make good micro-foam with it. Thankfully, we found a manufacturer that would make us a 4 hole steam tip with 0.9 mm holes at the proper angle, giving you excellent micro-foam. This tip has a 8mm Male thread.

* Will not fit old style Anita with burn arm.

To see a complete listing of our steam tips, Click Here

Accessories (Related Products)
No Burn Steam Arm
Chris' Price: $45.00

Add
No Burn Steam Arm

Average Rating: 5 of 5 Total Reviews: 4 Write a review »

  0 of 0 people found the following review helpful:
 
4 hole steam tip for alexia May 30, 2016
Reviewer: SANTIAGO ARGUELLES from Mexico  
the steam tip works as advertise. the problems are on the hand side as it is A LOT faster than the 2 hole tip. I had to cut the hose of no burn arm a little as it was too long as was getting mostly water out of the tip but that was an arm problem and not a tip problema.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great tip for micro-foam May 16, 2016
Reviewer: Philip Loseby from Juneau, AK United States  
Works as described!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Excellent but requires mod December 30, 2013
Reviewer: Tim from Vienna , VA United States  
I noticed steam wasn't coming out of all 4 holes, and noticed insulation is cut at an angle which blocks 1 or 2 of the holes.  I cut at 90 thinking it would solve the issue, which it did, but steam pressure out of the holes seemed weaker and did not produce good froth.  I trimmed at a greater than 45 but less than 90 deg angle, which does the trick.  I have no idea why this works, but I get steam out of all 4 holes now and the steam pressure is there for excellent froth.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great Steam wand November 2, 2013
Reviewer: Bo Mann from VA United States  
Used this with an upgraded joystick steam wand on my Expobar office lever. The stock single tip, and the dual hole tip did not produce very good micro foam. This is an excellent upgrade and from the first use it produced excellent results! Thanks

Was this review helpful to you?