Home > Quick Links > Accessories > Steam Arms, Tips, and Knobs >

Isomac New 2 Hole Steam Tip

Isomac New 2 Hole Steam Tip


 
Chris' Price: $9.95


Product Code: OT09950VN
Qty:

Description
 

New two hole steam tip with smaller holes, making it easy to micro-foam small quantities of milk before overheating it. This tip fits the following machines but is not necessarily limited to: Isomac, Pasquini, Oscar, Alexia, and Grimac.The thread is female and 10 mm in size.

To see a complete listing of our steam tips, Click Here

Accessories (Related Products)
Adaptor Converter: 8 mm Female to 10 mm Male
Chris' Price: $10.95

Add
Adaptor Converter: 8 mm Female to 10 mm Male

Average Rating: 4.5 of 5 Total Reviews: 8 Write a review »

  0 of 0 people found the following review helpful:
 
Very good for practicing latte art. March 19, 2018
Reviewer: Nate L. from Washington D.C.  
It does make difference. Now milk takes longer to reach 60 degrees Celcius.  Frothing gets done before milk reaches 60 degrees Celsius most of the time.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Isomac New 2 Hole Steam Tip June 9, 2017
Reviewer: Laszlo Molnar from Diosd, Pest Hungary  
very good

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Oscar Simonelli Steam Reduction March 9, 2017
Reviewer: Clint Owens from Wake Forest, NC United States  
I used this two hole steam tip on my Oscar and it almost reduced the steam too much but did work fine.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
2 hole tip March 1, 2017
Reviewer: Ken Hagen from Anabel, MO United States  
Very good

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Small holes maintain good steam pressure February 16, 2017
Reviewer: Peter Honig from Concord, MA United States  
This steam tip keeps my Vetrano 2B from loosing excessive pressure such that I can now get better micro-foam than with the stock tip. However, I am very disappointed that this part is made of chrome plated brass and not stainless steel (thus my 4 stars and not 5). As for the 8mm/10mm adaptor that many people buy along with this, *it* is the one with the flaw, not this tip. In fact, I fixed mine using my lathe to cut a captive groove for the O-ring (see my adaptor review for details). Lastly, watch out for several tiny metal chips on the inside left over from the thread cutting process! I used a toothpick and pressurized air to remove them from mine.

Was this review helpful to you?

View All Customer Reviews