Home > Parts > Steam Arms, Tips, and Knobs >

Joystick Steam Valve Assembly - 1st Generation

Joystick Steam Valve Assembly - 1st Generation


 
Chris' Price: $69.95


Product Code: OT0995RUV
Qty:

Description
 

Multi-directional joystick steam and hot water assemblies for the Andreja Premium and the Vetrano espresso machines by Quick Mill. The assemblies are only able to easily fit on these two espresso machines, no adapter required. They will fit not only the new designed models but the original models as well. The joystick steam arm assembly comes with a standard two hole tip.

**NOTE** These joystick assemblies can also be fitted on to the Alex II, Alex Duetto (II and 3.0), Isomac machines, Quick Mill Vetrano 2B, and Exbobar machines. However, an adapter is needed for each joystick assembly in order to operate. It is listed below. These will NOT work on the Rocket machines.


Dimensions:
Hot Water Joystick measures 7" in length
Steam Joystick measures 8.5" in length
Thread size 1/4"in British thread.

Accessories (Related Products)
Joystick Assembly Adapter
Chris' Price: $13.95

Add
Joystick Assembly Adapter for Izzo Machines

Average Rating: 4.5 of 5 Total Reviews: 2 Write a review »

  0 of 0 people found the following review helpful:
 
Rebuild May 26, 2019
Reviewer: Lee G. from Atlanta, GA United States  
Awesome technical support!  Techs at Chris’s Coffee are great to work with.  I’m a long distance customer so I handle my own rebuilds and repairs.  Always get great advice and support from the team at Chris’s!

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Joystick steam valve May 13, 2019
Reviewer: Rand Anderson from Sacramento, CA United States  
The valve was somewhat difficult to install on my Andreja Premium - very tight spacing.  Once installed, the joystick operation was too tight to operate properly.  I released the nut that holds the steam wand enough to loosen its operation.  The joystick remained extremely tight.  I applied some silicon grease to the outside of the ball to which the joystick is attached.  That grease released the operation of the joystick, which had been so tight that I feared it would bend or break it.
Now it operates smoothly.  Adjustment information was not included with the joystick.  I recommend strongly that it be added to the package.

Was this review helpful to you?