Info

Specials

Quick Links



Official PayPal Seal

InstragramInstragram

  Home > Accessories >

  Joystick Assemblies



 
Alternative Views:



Multi-directional joystick steam and hot water assemblies for the Andreja Premium and the Vetrano espresso machines by Quick Mill. The assemblies are only able to easily fit on these two espresso machines, no adapter required. They will fit not only the new designed models but the original models as well. The joystick steam arm assembly comes with a standard two hole tip.


**NOTE**: These joystick assemblies can also be fitted on to the Alex II and the Alex Duetto machines (II and 3.0). However, an adapter is needed for each joystick assembly in order to operate. It is listed below.


Item# Item Name Chris' Price Qty Add
JT995H20 Joystick Assemblies - Hot Water Arm
$69.95
JT995STM Joystick Assemblies - Steam Arm
$69.95
Check the items you wish to purchase, then click

Accessories (Related Products)
Joystick Assembly Adapter for Izzo Machines
Chris' Price: $9.95

Add


Average Rating: 4.5 of 5 | Total Reviews: 3 Write a review »

  0 of 0 people found the following review helpful:
 
works but jury out January 6, 2014
Reviewer: Tim from Vienna , VA United States  
No installations instructions.  Alex Tre by Izzo, required really cranking on the adapter to get the joystick assembly snug since the copper flare gasket takes up space.  thin copper nut on original assembly remains off since the retaining nut will not fit with the retaining nut from the pump line. Joystick wand housing points out since the assembly base at the case has to be straight to fit the PID housing, which barely fits, and requires some assembly manipulation to make it fit.  The wand is much longer, and requires extra maneuvering to get over the tray.  The joystick handle was loose, so I took pliers to hold the metal part and hand tightened the handle (hope it stays on).  Once installed, the joystick works well.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Fits an Expobar Office Lever perfectly November 2, 2013
Reviewer: Anonymous Person from VA United States  
I had done a full restoration on an Expobar Office Lever (2002) and decided to switch out the Steam wand. Chris's was very helpful and even though they do not sell Expobar they were able to help me with the adapter. You will need to use the stainless washer and some teflon tape to get a good seal, but no leaks and it is nice to have a joystick and anti-burn wand...Thanks!

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Fits rocket machine June 4, 2013
Reviewer: aaron oehlke from hammonds plains, NS Canada  
On a whim I tried this on my rocket cellini classic. Works perfectly. You do need the 10$ adapter. I plan to make a joystick on the hot water arm too!

Was this review helpful to you?