Home > Quick Links > Accessories > Softeners and Filters >

Water Softening and Filtration System
Water Softening and Filtration System

Chris' Price: $110.00

Product Code: SOFTSYSG

John Guest Fitting*:

Description Specifications

This combination water softener and filter system contains everything you need to connect your espresso machine to your water source and protect it at the same time from mineral deposits. The filter housings are generic 10", therefore you won't be tied into expensive proprietary replacement cartridge. The carbon filter removes odor and taste and filters to 10 microns, and the softener removes 15,000 PPM. The tubing and fittings are John Guest and require no wrenches to install. The best part is no trips to Home Depot; everything you need is here.

Includes the following:

2 10" Filter Housing - Dimensions: 7" Width Clearance x 14" Height Clearance
2 Filter Mounting Bracket
1 Filter Housing Wrench
1 10" 10 Micron Carbon Filter
1 10" Cation Softener 15,000 PPM Rated
2 John Guest 1/4" or 3/8" Ball Valves
4 John Guest Fitting 3/8" PT by 1/4" or 3/8" JG
1 Max Adaptor 3/8" CP by 1/4" or 3/8" JG
15 John Guest 1/4" or 3/8" Tubing 15'

Average Rating: 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
Somewhat large, but quick and inexpensive January 22, 2017
Reviewer: Bill S. from Jersey City, NJ United States  
It takes between 30 and 60 minutes to install and test, assuming you have little to no plumbing experience.  If you know what you're doing, you can do it even faster.

There are generic filter housings that take up less space which can be purchased from other vendors -- that is, there is a single housing unit which allows you to install multiple filters without any tubing in between -- but if you don't mind taking up a little extra space, or if you need the flexibility of installing each housing component on a different surface because of space limitations, this one will work nicely.

Was this review helpful to you?